badssl.com is an amazing tool especially for testing "TLS intercepting" boxes. I've seen more than one fortune 500 company that re-sign certain broken certs with their own CA, allowing silent MITM.
Coming up on 20 years ago I was building a system that was going to be deployed at various locations throughout a very large country. All locations had internet access; but the throughput, latency, and quality (e.g. packet drops) were all over the map.
For testing we ended up building a small linux box to proxy for the test environment in the office. We could throttle the throughput to any arbitrary level, introduce latency, and introduce packet drops. It's amazing how poorly a frontend will work when you throttle the network to 128kbps, and introduce a small percentage of dropped packets. But once you get the system to work (for some definition of "work") under those conditions you feel pretty good about deploying it.
The linux kernel traffic control (tc) can do network emulation with qdisc to simulate bad network connections. Add latency, jitter, bandwidth limits, and settable levels of traffic loss to your network interface.
If you're testing hardware or vm's that don't support it or don't have root, you can stick your linux box transparently in the middle by bridging two interfaces, and apply your traffic mangling there. Testing wifi? Use a decent WiFi AP connected to one of these bridges and mangle your traffic once it hits the wire/after it stops being RF.
At a previous job I had a linux box set up with multiple bridges (each set with a different "testing profile" on different vlans) and trunked to a physical switch. Made it very easy for people in the office to attach physical devices through known bad network links by either using pairs of physical switchports or just dumping VMs/SSIDs into the right VLAN so they could test different things (simultaneously) without needing to reconfigure the actual mangling.
Worth noting that tc applies to egress traffic, so if you want a uniformly bad line it needs applying to both sides - but it does mean you can simulate unidirectional link problems too.
Some proxies, iptables extensions, and OS-provided tools exist - there's almost certainly a combo that would work for them. What platform?
Unless it's for a custom physical device, then uh. idk. Probably something, proxying through another computer that is hosting a separate wifi network? But likely a lot harder.
> You can simulate bad wifi with the throttling option on the network tab of your browser's developer tools
Oh? How does that help for native applications?
> You can always also simulate bad WiFi by walking away from your access point until you have bad wifi
That's unfortunately very inconvenient when you work on an embeddeded device prototype that consists of several boards interconnected by hair thin wires :)
Maybe I should make some friends across the street to the point they give me access to their APs...
I'm building a product that helps out Docker usage in poorly networked environments (ie, robotics deployments). I've just been moving the Jetson around the house.
to actually tackle this (on the off chance you're serious, I'm assuming not) - this doesn't work.
The payload that implements your crypto cannot be delivered over http, because any intermediate party can just modify your implementation and trivially compromise it.
If you don't trust TLS, you have to pre-share something. In the case of TLS and modern browser security, the "pre-shared" part is the crypto implementation running in the browser, and the default trusted store of root CAs (which lives in the browser or OS, depending).
If you want to avoid trusting that, you've got to distribute your algorithm through an alternative channel you do trust.
You are right presharing is a requirement, unless you hash the keys used to encrypt the secret into the secret itself, but that can only be prooven later on a channel where the same MITM is not present.
Work in progress, that said presharing solve(d/s) enough for the world to dump DNS and HTTPS in a bin and light it on fire now, because nobody has the power to implement all the MITM needed if everyone "makes their own crypto" on top of allready shared secrets!
reply