Only for the record until soome 15 years ago, exchanging boards was easy, later disk PCB's contrain some "adaptive" data into a (soldered) EPROM (or Flash/whatever, anyway a memory chip), so now you have to de-solder the chip from the old board and re-solfer it on the new one.
There are dedicated hardwares+softwares (as an example the "PC-3000") that are capable of re-programming the chip on the new board with data extracted from the chip on the old board or to re-program them anew, but they are very pricey and only data recovery companies can afford them and the connected training/resources.
So:
1) simple card swapping won't work on any disk manufactured since (roughly) 2005 (possibly even earlier)
2) card swapping can still be made BUT you need to "migrate" the chip from the old board, it is usually an 8-pin SMD so it is doable at home, but not exactly easy-peasy if you are not familiar and experienced in dde-soldering and soldering
There are dedicated hardwares+softwares (as an example the "PC-3000") that are capable of re-programming the chip on the new board with data extracted from the chip on the old board or to re-program them anew, but they are very pricey and only data recovery companies can afford them and the connected training/resources.
So:
1) simple card swapping won't work on any disk manufactured since (roughly) 2005 (possibly even earlier)
2) card swapping can still be made BUT you need to "migrate" the chip from the old board, it is usually an 8-pin SMD so it is doable at home, but not exactly easy-peasy if you are not familiar and experienced in dde-soldering and soldering